|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
WWW.PHIHONG.COM 275-Watt Power-Over-Ethernet Power Supply PSM275-909 with active Power Factor Correction Features * * * * 12V for Switch plus PoE 8-24 Ports PoE RS232 with Windows GUI EMI Class B * * * * Power Management Full Protection OVP, OTP, OCP, UVP 1U Operate from AC or Single Voltage 48V RPS Source Applications * * * * * * 10/100 Base T Ethernet switches Security Systems * * * VoIP Phone systems Blades Safety Approvals cUL/UL CE TUV Mechanical Characteristics Length: 197.5mm (7.78in) Width: 105mm (4.13in) * * Height: 40mm (1.57in) Weight: 1kg (2.5lb.) Output Specifications Model DC Output Voltage Load (2) Min. Max. Ripple (1) P-P (max) Regulation Line Load 5% 2% 50V (per port) 0A 0.35A 20KHz 300mVp-p PSM275-909 >20KHz 50mVp-p 2% 5% 12V 0.75A 6.25A Note: (1) Noise is measured with resistor load (not as electronic load). The output is decoupled with 10uF bulk electrolytic and 0.1uF ceramic capacitor. Measurement is made with a high impedance probe connected across the decoupling capacitance. Band width limited to 100mHz. (2) The sum of total powered ports cannot exceed 200W. Phihong reserves the right to make changes without further notice. Please consult Phihong USA and visit www.phihong.com for the most up-to-date specifications. PSM275-909 Characteristics INPUT: AC Input Voltage Rating 100 to 240VAC WWW.PHIHONG.COM Short Circuit Protection No fire, shock hazard or damage to power supply by short circuit. Power supply continues to operate after short circuit is removed. AC Input Voltage Range 90 to 264VAC ENVIRONMENTAL: Temperature Operation Non-operation 0 to +55C -20 to +70C AC Input Current 4A(RMS) max. for 115VAC/60Hz at max. load 2A(RMS) max. for 230VAC/50Hz at max. load Humidity AC Input Line Fuse 5A Operation Non-Operation 10 to 95% 10 to 95% Leakage Current 3.5mA max. @ 254VAC 60Hz Altitude Operation Non-Operation up to 3km (10K feet) up to 12.2km (40K feet) AC Input Frequency 47-63Hz EMC Conduction: FCC Part 15 Class A EN55022 (CISPR22) Class A Radiation: Support customer in passing FCC/CISPR22 Class A for overall EMI rating AC Inrush Current 20A(RMS) max. for 115VAC/60Hz at max. load 40A(RMS) max. for 230VAC/50Hz at max. load OUTPUT: Output Input Source Isolation Test Input to earth ground--1500VAC or 2200VDC for 1 minute, less than 10mA leakage current Max. Watt (PoE) 200W 370W Max. Watt (12V Switch) 75W 75W Immunity EN50082-1 ESD: EFT/Burst: Line Transient: Voltage Dips Harmonic: EN61000-4-2. Level 4 EN61000-4-4. Level 3 EN61000-4-5. Level 3 EN61000-4-11 EN61000-3-2 AC DC Efficiency 80% min. @ 90VACVin264VAC FEATURE: Total Output Power 275Watts with a min. of 12CFM airflow Input AC Connector Molex p/n 09-65-2029 or equivalent Hold-up Time 20ms Isolated RPS DC in Connector Molex p/n 39-31-0120 or equivalent Power Factor Correction Meet EN61000-3-2 Power-Over-Ethernet Output Connector Molex p/n 90325-0018 or equivalent Over Voltage Protection 59.5V max. latching-reset of input voltage required Over Temperature Protection Automatically shut down by over temperature shutdown circuit Block Diagram Dimension Diagram Unit: mm |
Price & Availability of PSM275-909 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |